325L
Original price was: $579.00.$499.00Current price is: $499.00.
Husqvarna 325L – a brushcutter with high power for efficient trimming and clearing. The brushcutter has an easy-start engine with reduced resistance in the starter cord for minimised effort. Use is convenient with easy-to-understand controls and a stop switch that automatically resets to the ON position to facilitate the next start. 325L comes equipped with the T35 trimmer head, which includes Tap’n Go for convenient line feed by pushing the trimmer head into the ground.
HOT PRICE! Save up to $100! This season take advantage of hot prices on selected Petrol Handheld products for a limited time!*
Terms & Conditions: *Offer valid 01/09/24 – 31/12/24 at participating Husqvarna Dealers only, while stocks last. Valid for the following models only – Grass Trimmers: 122C, 129C, 325L, 525LST. Leaf Blowers: 125B, 125BVX. Chainsaws:130. Hedge Trimmers: 122HD45, 122HD60. Brushcutters: 129R, 535RXT.
Straight shaft for extended reach
Straight shaft for extended reach.
All controls are designed to be easy to understand and use.
All controls are designed to be easy to understand and use.
When the stop switch has been used, it is automatically reset to ON to facilitate the next start.
When the stop switch has been used, it is automatically reset to ON to facilitate the next start.
Specially-designed engine and starter for easy and fast starting with minimum effort
Specially-designed engine and starter for easy and fast starting with minimum effort. Resistance in the starter cord is reduced by up to 40%.
With Tap'n Go, line feeding is done effortlessly by simply pushing the trimmer head into the ground.
Heavy duty twin line cutting system with Tap 'N Go™ for quick line feed.
Bevel gear designed for optimal cutting performance.
Bevel gear designed for optimal cutting performance. It provides high torque and ensures the correct angle so that the cutting equipment is kept parallel to the ground.
Comfortable curved handle and shaft for easier use and increased maneuverability
Comfortable curved handle and shaft for easier use and increased maneuverability
Transparent fuel tank makes it easy to check the fuel level.
See-through fuel tank for viewing fuel level.
Engine | |
Clutch engagement speed (±120) | 4200 rpm |
Cylinder bore | 36 mm |
Cylinder displacement | 27.6 cm³ |
Cylinder stroke | 27 mm |
Electrode gap | 0.5 mm |
Fuel consumption | 495 g/kWh |
Fuel tank volume | 0.34 l |
Idling speed | 3000 rpm |
Ignition module air gap | 0.3 mm |
Maximum power speed | 8000 rpm |
Maximum rpm output shaft | 7200 rpm |
Output shaft thread | M10x1.25 Lefthanded |
Output shaft power | 0.85 kW |
Power source | Petrol |
Spark Plug | Husqvarna HQT-4 672201 |
Torque, max. | 1.1 Nm |
Torque, max. at rpm | 6000 rpm |
Transmission | |
Drive gear angle | 30 ° |
Gear ratio | 13.19 |
Vibration | |
Equivalent vibration level (ahv, eq) front handle | 2.9 m/s² |
Equivalent vibration level (ahv, eq) rear handle | 3.2 m/s² |
Emission | |
Exhaust emissions (CO average) EU | 43.3 g/kWh |
Exhaust emissions (CO average) CARB | 30.3 g/kWh |
Exhaust emissions (CO average) EPA | 30.3 g/kWh |
Exhaust emissions (HC average) EU | 28.2 g/kWh |
Exhaust emissions (HC average) CARB | 31.56 g/kWh |
Exhaust emissions (HC average) EPA | 31.56 g/kWh |
Exhaust emissions (NOx average) EU | 2.1 g/kWh |
Exhaust emissions (NOx average) CARB | 1.82 g/kWh |
Exhaust emissions (NOx average) EPA | 1.82 g/kWh |
Equipment | |
Grass blade | Not included |
Harness | Not included |
Saw blade | Not included |
Trimmer head | T35 M10 |
Lubricant | |
Lubricant type (bevel gear) | Power grease |
Lubricant type (Engine) | Husqvarna 2 stroke or equiv. at 50:1 |
Sound and Noise | |
Sound power level, guaranteed (LWA) | 114 dB(A) |
Sound power level, measured | 110 dB(A) |
Sound pressure level at operators ear | 96.3 dB(A) |
Dimensions | |
Tube diameter | 24 mm |
Tube length | 1483 mm |
Weight (excl. cutting equipment) | 5 kg |